{"id":278,"date":"2025-05-20T14:00:46","date_gmt":"2025-05-20T12:00:46","guid":{"rendered":"https:\/\/nanosmartlab.cnr.it\/?page_id=278"},"modified":"2025-10-02T12:28:56","modified_gmt":"2025-10-02T10:28:56","slug":"lab-instruments","status":"publish","type":"page","link":"https:\/\/nanosmartlab.cnr.it\/?page_id=278","title":{"rendered":"Lab Instruments"},"content":{"rendered":"
\n \n
\n \n \n
\n \n
\n \n
\n \n
\n
\n \n \n
\n \n
\n \n
\n
\n \n \n \"\"\n
<\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n \n \n
\n \n
\n \n
\n \n \n

OUR INTEGRATED OPTICAL LAB<\/h4>\n <\/div>\n <\/div>\n
\n \n \n
\n

Our Integrated Optical Lab combines advanced techniques\u2014such as localized plasmon spectroscopy, surface-enhanced Raman spectroscopy (SERS), FTIR, atomic force and optical microscopy, laser writing, and ultra-precise motion control\u2014to\n perform comprehensive characterization of smart materials, liquid crystals, and nanostructured surfaces. These cutting-edge tools allow us to investigate the physical, chemical, and optical properties of functional nanomaterials,\n supporting the development of innovative sensing platforms and photonic devices with applications across nanotechnology and materials science.<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

\n \n \n
\n \n
\n \n
\n \n
\n
\n \n \n
\n \n
\n \n
\n
\n \n \n \"\"\n
<\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n \n \n
\n \n
\n \n
\n \n \n
532nm 7W High Power Diode Pumped Laser<\/h5>\n <\/div>\n <\/div>\n
\n \n \n
\n

This time it is a\n  532nm green DPSS laser<\/a> commonly used in laboratories. Its output power can reach 7000mW.  A heat dissipation module is added to the bottom of the laser. There are 2 cooling fans at the bottom of the laser\n heat dissipation. There are two working modes, CW\/Modulation, to choose from on the back of the power supply<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

\n \n \n
\n \n
\n \n
\n \n
\n
\n \n \n
\n \n
\n \n
\n
\n \n \n \"\"\n
<\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n \n \n
\n \n
\n \n
\n \n \n
457 nm High Power Single Longitudinal Mode Blue Laser MSL-W-457\/500~2000 mW<\/h5>\n <\/div>\n <\/div>\n
\n \n \n
\n

MSL-W-457 series is a high power all solid state single longitudinal mode blue laser at 457 nm, which features ultra compact, long lifetime and easy operating. It is used in DNA sequencing, flow cytometry, cell sorting, optical\n instrument, spectrum analysis, interference, measurement, holography, physics experiment, etc.<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

\n \n \n
\n \n
\n \n
\n \n
\n
\n \n \n
\n \n
\n \n
\n
\n \n \n \"\"\n
<\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n \n \n
\n \n
\n \n
\n \n \n

Laser-785 Excitation Laser for Raman Spectroscopy<\/h4>\n <\/div>\n <\/div>\n
\n \n \n
\n

\n
The Laser-785 series is a line of continuous-wave lasers designed specifically for Raman spectroscopy.<\/p>\n

These high-power excitation sources have integrated laser drivers and a thermoelectric coolers.<\/p>\n

The Laser-785 series have narrow spectral lines, is compact and features hermetically sealed laser component make it optimal for industrial and medical applications.<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

\n \n \n
\n \n
\n \n
\n \n
\n
\n \n \n
\n \n
\n \n
\n
\n \n \n \"\"\n
<\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n \n \n
\n \n
\n \n
\n \n \n

457nm DPSS Blue industrial lasers system high stability with Output Power 1mW-3000mW<\/h4>\n <\/div>\n <\/div>\n
\n \n \n
\n

Stable and adjustable output power<\/p>\n

Over-temperature and over-current protection<\/p>\n

External modulation available<\/p>\n

Suitable for fluorescence excitation, raman spetroscopy, optical spectrum analysis, etc.<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

\n \n \n
\n \n
\n \n
\n \n
\n
\n \n \n
\n \n
\n \n
\n
\n \n \n \"\"\n
<\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n \n \n
\n \n
\n \n
\n \n \n

Tungsten halogen lamp light source HL-2000 series<\/h4>\n <\/div>\n <\/div>\n
\n \n \n
\n

The HL-2000 is adjusted at the factory to provide maximum power into a 200\u00b5m fiber. If a lower optical power is required or a different fiber (bundle) diameter is used, you can adjust the optical power of the unit. Refer to HL-2000\n Diagrams while using the following procedure. <\/p>\n

Illumination technology <\/strong>tungsten halogen lamp<\/p>\n

Spectrum <\/strong>visible, NIR<\/p>\n

Wavelength <\/strong>Min.: 360 nm Max.: 2,400 nm<\/p>\n

\n
\n <\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

\n \n \n
\n \n
\n \n
\n \n
\n
\n \n \n
\n \n
\n \n
\n
\n \n \n \"\"\n
<\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n \n \n
\n \n
\n \n
\n \n \n

Small Laser 785 nm<\/h4>\n <\/div>\n <\/div>\n
\n \n \n
\n

\n
\n <\/p>\n

Low Cost Turnkey Lasers offer excellent beam quality and output powers up to 50mW. These lasers feature compact designs for simplified integration and manually adjustable output power through the control box. Each laser features TE\n cooling and flexible interface allowing for digital or analog modulation, with multiple color and wavelength options available. Low Cost Turnkey Lasers are ideal for research, flow cytometry, and microscope illumination applications<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

\n \n \n
\n \n
\n \n
\n \n
\n
\n \n \n
\n \n
\n \n
\n
\n \n \n \"\"\n
<\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n \n \n
\n \n
\n \n
\n \n \n

Broadband Halogen Fiber Optic\n
Illuminators Light Source LAMP ThorLabs<\/h4>\n <\/div>\n <\/div>\n
\n \n \n
\n

Thorlabs’ OSL2 and OSL2IR Fiber-Bundle-Coupled Tungsten-Halogen Light Sources deliver white light for brightfield microscopy, laboratory, and illumination applications. The output illumination intensity is exponentially variable from\n 0 to 100% using a knob on the front of the unit. The 150 W EKE halogen bulbs have a 3200 K color temperature and are user replaceable with optional bulbs sold below. These portable fiber-coupled light sources are compatible\n with 100 to 120 VAC as well as 220 to 240 VAC and includes a location-specific power cord.<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

\n \n \n
\n \n
\n \n
\n \n
\n
\n \n \n
\n \n
\n \n
\n
\n \n \n \"\"\n
<\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n \n \n
\n \n
\n \n
\n \n \n

Laser 1064 nm Stellar Net Inc<\/h4>\n <\/div>\n <\/div>\n
\n \n \n
\n

\n
\n <\/p>\n

    \n
  • 785 or 1064nm Raman Laser with direct attach 1\/2\u2033 vial holder<\/li>\n
  • Raman Laser line 0.2nm FWHM<\/li>\n
  • >499mWatt adjustable power<\/li>\n
  • Direct attach to spectrometer reduces system cost<\/li>\n
  • Holds 1\/2\u2033 round sample vials- liquids, powders, and solids<\/li>\n
  • Miniature size just 2x4x6\u2033<\/li>\n
  • Li-ion Battery powered in Rugged metal case<\/li>\n <\/ul>\n

    \n
    \n <\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

    \n \n \n
    \n \n
    \n \n
    \n \n
    \n
    \n \n \n
    \n \n
    \n \n
    \n
    \n \n \n \"\"\n
    <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
    \n
    \n \n \n
    \n \n
    \n \n
    \n \n \n

    Ocean Optics QE Pro Scientific grade Spectrometer<\/h4>\n <\/div>\n <\/div>\n
    \n \n \n
    \n

    QE Pro<\/em> high sensitivity spectrometers deliver low limits of detection and low stray light performance for applications from DNA sequencing to reaction monitoring. The spectral buffering feature ensures data integrity\n at high data collection rates for confident results.<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

    \n \n \n
    \n \n
    \n \n
    \n \n
    \n
    \n \n \n
    \n \n
    \n \n
    \n
    \n \n \n \"\"\n
    <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
    \n
    \n \n \n
    \n \n
    \n \n
    \n \n \n

    Flame Miniature Spectrometer<\/h4>\n <\/div>\n <\/div>\n
    \n \n \n
    \n

    This is a huge benefit made possible by a unique manufacturing approach. The slits are laser cut in finished slit assemblies. This makes it possible to change slits without changing the wavelength calibration. You can use the\n same unit for high optical resolution applications such as atomic emission, and low light level applications like fluorescence.<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

    \n \n \n
    \n \n
    \n \n
    \n \n
    \n
    \n \n \n
    \n \n
    \n \n
    \n
    \n \n \n \"\"\n
    <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
    \n
    \n \n \n
    \n \n
    \n \n
    \n \n \n

    USB4000 Fiber Optic Spectrometer<\/h4>\n <\/div>\n <\/div>\n
    \n \n \n
    \n

    The USB4000 is the last-generation flagship spectrometer, with a 3648-element Toshiba linear CCD array for increased signal-to-noise and enhanced electronics for controlling the spectrometer and accessories.<\/p>\n

    \n
    \n <\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

    \n \n \n
    \n \n
    \n \n
    \n \n
    \n
    \n \n \n
    \n \n
    \n \n
    \n
    \n \n \n \"\"\n
    <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
    \n
    \n \n \n
    \n \n
    \n \n
    \n \n \n

    NIRQuest spectrometers Ocean Optics<\/h4>\n <\/div>\n <\/div>\n
    \n \n \n
    \n

    NIRQuest spectrometer models now come with a replaceable slit design as standard, increasing measurement flexibility with easy user changes in the field. <\/p>\n

    Additionally, the option of adding an internal shutter is now available to more effectively manage light throughput and dark measurements in experiment setups. <\/p>\n

    The NIRQuest is a robust, reliable spectrometer with a fast response time and good optical resolution over 900-2500 nm to suit applications from moisture detection and chemical analysis to high-resolution laser and optical fibre characterisation.<\/p>\n

     <\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

    \n \n \n
    \n \n
    \n \n
    \n \n
    \n
    \n \n \n
    \n \n
    \n \n
    \n
    \n \n \n \"\"\n
    <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
    \n
    \n \n \n
    \n \n
    \n \n
    \n \n \n

    AFM NT-MDT<\/h4>\n <\/div>\n <\/div>\n
    \n \n \n
    \n

    NTEGRA Academia is a multifunctional device for teaching high school children and university students the basics of scanning probe microscopy, including the participation in research projects in the field of nanotechnology, physics,\n chemistry, biology, medicine etc. The device is capable of performing more than 40 measuring methods, what allows analyzing physical and chemical properties of the surface with high precision and resolution. It is possible to carry\n out experiments not only by conventional silicon cantilevers but also by tungsten wire which is chiper and easy to use in educational proposes.<\/p>\n

    Special device for the tangsten probes creation by the method of electrochemical etching which allows to sharpen tangten probes by students themselves.<\/p>\n

    Exchangeable scanner with capacitive sensors with a scan range in high voltage mode (X \u00d7 Y \u00d7 Z); 100\u0445100\u044510 microns, in the low voltage mode (X \u00d7 Y \u00d7 Z); 3x3x2 microns Minimum scanning step: 2 nm<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

    \n \n \n
    \n \n
    \n \n
    \n \n
    \n
    \n \n \n
    \n \n
    \n \n
    \n
    \n \n \n \"\"\n
    <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
    \n
    \n \n \n
    \n \n
    \n \n
    \n \n \n

    Olympus Trinocular Halogen Microscope CX 31<\/h4>\n <\/div>\n <\/div>\n
    \n \n \n
    \n

    \n
    Trattamento anti-funghi ottico protegge aiuta a proteggere le parti anche nelle regioni ad alta umidit\u00e0<\/p>\n

    plcn serie di piano Achromat obiettivi offrono elevati livelli di planarit\u00e0<\/p>\n

    Fixed Abbe Condenser NA 1.25, CENTRO e per illuminazione koehler focalizzabile<\/p>\n

    fluorescenza pacchetto di aggiornamento disponibile come opzione<\/p>\n

    Una lampadina alogena 6 V\/30 W fornisce elevata illuminazione per qualsiasi osservazione<\/p>\n

    \n
    \n <\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

    \n \n \n
    \n \n
    \n \n
    \n \n
    \n
    \n \n \n
    \n \n
    \n \n
    \n
    \n \n \n \"\"\n
    <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
    \n
    \n \n \n
    \n \n
    \n \n
    \n \n \n

    Microscopio Olympus BX51<\/h4>\n <\/div>\n <\/div>\n
    \n \n \n
    \n

    This Olympus BX51 fluorescence microscope is equipped with a trinocular head, 10x eyepieces, and UPLANFL objectives. The microscope includes a 6 position fluorescence turret and mercury power supply. We can configure this with up to\n 6 fluorescence filters<\/p>\n

    \n
    \n <\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

    \n \n \n
    \n \n
    \n \n
    \n \n
    \n
    \n \n \n
    \n \n
    \n \n
    \n
    \n \n \n \"\"\n
    <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
    \n
    \n \n \n
    \n \n
    \n \n
    \n \n \n

    Nicolet\u2122 iS50 FTIR Spectrometer<\/h4>\n <\/div>\n <\/div>\n
    \n \n \n
    \n

    Solve analytical challenges with ease using the Thermo Scientific\u2122 Nicolet\u2122 iS50 FTIR Spectrometer, featuring purpose-built accessories and integrated software \u2014 making it an all-in-one materials analysis workstation.<\/p>\n

    Designed to be highly flexible, the Nicolet iS50 FTIR Spectrometer can be upgraded from a simple FTIR bench to a fully-automated multi-spectral range system that can acquire spectra from far-infrared to visible. You can initiate novel\n ATR, Raman and NIR modules at the touch of a button, enabling access to these techniques without manually changing system components<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

    \n \n \n
    \n \n
    \n \n
    \n \n
    \n
    \n \n \n
    \n \n
    \n \n
    \n
    \n \n \n \"\"\n
    <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
    \n
    \n \n \n
    \n \n
    \n \n
    \n \n \n

    Pi Linear Stages and Motors<\/h4>\n <\/div>\n <\/div>\n
    \n \n \n
    \n

    PI offers a broad portfolio of motorized linear stages. The huge variety of applications also means a huge variety of technical possibilities for the linear axes. Travel ranges extend from a few millimeters to meters and for precision\n classes, from nanometers to micrometers: PI adapts the drive, guides or sensor technology to the application conditions.<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

    \n \n \n
    \n \n
    \n \n
    \n \n
    \n
    \n \n \n
    \n \n
    \n \n
    \n
    \n \n \n \"\"\n
    <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
    \n
    \n \n \n
    \n \n
    \n \n
    \n \n \n

    MicroMake \u2013 Laser Writter Micromachining System \u2013 BrightSystem<\/h4>\n <\/div>\n <\/div>\n
    \n \n \n
    \n

    MicroMake from Bright System is an integrated and compact laser micromachining unit for high precision and high resolution applications.<\/p>\n

    The system includes all the needed devices for direct laser micro-processing in a single monolithic element.<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

    \n \n \n
    \n \n
    \n \n
    \n \n
    \n
    \n \n \n
    \n \n
    \n \n
    \n
    \n \n \n \"\"\n
    <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
    \n
    \n \n \n
    \n \n
    \n \n
    \n \n \n

    ELEGO MARS – 3D Printer<\/h4>\n <\/div>\n <\/div>\n
    \n \n \n
    \n

    Mars C is a resin 3D printer from ELEGOO that combines industrial design with a user-friendly interface. The machine comes semi-assembled and allows to easily get used to it. The machine has an ABS body, which makes it lightweight,\n though decently stiff. As a light source this model utilizes 40W UV lights and a 2560 x 1440 2K HD masking LCD screen.<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

    \n \n \n
    \n \n
    \n \n
    \n \n
    \n
    \n \n \n
    \n \n
    \n \n
    \n
    \n \n \n \"\"\n
    <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
    \n
    \n \n \n
    \n \n
    \n \n
    \n \n \n

    ENGINE SR – STANDARD RESOLUTION<\/h4>\n <\/div>\n <\/div>\n
    \n \n \n
    \n

    \n
    \n <\/p>\n

    The ESR printers work with all Hyrel print heads, allowing you to work with\n
    numerous materials, including store-bought or home-made filaments,\n
    clays, pastes, hydrogels, photo-initiators, and cementitious materials,\n
    but we recommend the H21 for materials printed at over 300 \u00b0C<\/p>\n

    Designed with safety in mind<\/p>\n

    Rugged, all-metal design<\/p>\n

    Includes interchangeable mounting system<\/p>\n

    Plug-and-play modular heads<\/p>\n

    Ready for upgrade\/expansion options<\/p>\n

    Compatible with large volume extruders<\/p>\n

    Please note that thermoplastics like ABS, PLA, Nylon, NinjaFlex, FilaFlex, etc. do much better with a heated enclosure.<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

    \n \n \n
    \n \n
    \n \n
    \n \n
    \n
    \n \n \n
    \n \n
    \n \n
    \n \n \n

    <\/h4>\n <\/div>\n <\/div>\n
    \n \n \n
    <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
    \n \n \n
    \n \n
    \n \n
    \n \n
    \n
    \n \n \n
    \n \n
    \n \n
    \n
    \n \n \n \"\"\n
    <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
    \n
    \n \n \n
    \n \n
    \n \n
    \n \n \n

    Creality Ender 3 Stampante 3D<\/h4>\n <\/div>\n <\/div>\n
    \n \n \n
    \n

    On the Creality Ender 3 printer, you can use a wide range of printing materials such as PLA, ABS, TPU, wood, copper, etc.<\/p>\n

    The advanced technology of the Ender 3 extruder reduces the risk of clogging and ensures a smooth and silent extrusion.<\/p>\n

    Thanks to automatic print resumption, Ender 3 can recover the print after a power outage or a scheduled interruption, ensuring a trouble-free print.<\/p>\n

    Ender 3 features an eccentric Y: an exceptional innovative solution that ensures precise and stable hot bed leveling.<\/p>\n

    The Creality Ender 3 printer offers a wide range of slicing software, such as Cura, Repetier-Host, simplify3D, to meet the needs of designers and 3D printing enthusiasts.<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

    \n \n \n
    \n \n
    \n \n
    \n \n
    \n
    \n \n \n
    \n \n
    \n \n
    \n
    \n \n \n \"\"\n
    <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
    \n
    \n \n \n
    \n \n
    \n \n
    \n \n \n

    Precision balance<\/h4>\n <\/div>\n <\/div>\n
    \n \n \n
    \n

    Internal calibration via side swivel knob, to ensure maximum precision and make operation independent of the place of installation<\/p>\n

    Stable reaction to temperature changes<\/p>\n

    Short stabilization interval<\/p>\n

    High mechanical robustness<\/p>\n

    High safety in cases of decentralized load<\/p>\n

    Capacity display: An ascending bar display indicates the weighing capacity still available<\/p>\n

    Standard windproof cabinet, weighing chamber W\u00d7D\u00d7H 158\u00d7130\u00d778 mm<\/p>\n

    Hard protective cover incl. in the supply<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

    \n \n \n
    \n \n
    \n \n
    \n \n
    \n
    \n \n \n
    \n \n
    \n \n
    \n
    \n \n \n \"\"\n
    <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
    \n
    \n \n \n
    \n \n
    \n \n
    \n \n \n

    Mini Centrifuge<\/h4>\n <\/div>\n <\/div>\n
    \n \n \n
    \n

    The DLab Mini Centrifuge D1008 distributed by Protekno is used in diagnostic laboratories where molecular biology analysis is operated. It finds its place in the interlude between the extraction and reading procedure, it can also be\n used for the manual extraction of DNA, RNA and proteins, but also to recover the supernatant necessary for reading. The compact and pleasant design makes it suitable for laboratories where space management is of particular importance.\n The D1008 model reaches a maximum speed of 7000 rpm \/ rpm per minute<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

    \n \n \n
    \n \n
    \n \n
    \n \n
    \n
    \n \n \n
    \n \n
    \n \n
    \n
    \n \n \n \"\"\n
    <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
    \n
    \n \n \n
    \n \n
    \n \n
    \n \n \n

    Stuart Block Heaters<\/h4>\n <\/div>\n <\/div>\n
    \n \n \n
    \n

    Stuart block heaters are designed to accurately control the temperature of test tubes and other small containers using heated aluminium blocks drilled with holes of the appropriate size for the containers in use.<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

    \n \n \n
    \n \n
    \n \n
    \n \n
    \n
    \n \n \n
    \n \n
    \n \n
    \n
    \n \n \n \"\"\n
    <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
    \n
    \n \n \n
    \n \n
    \n \n
    \n \n \n

    KDS Legato\u2122 270P series syringe pump, push\/pull, programmable<\/h4>\n <\/div>\n <\/div>\n
    \n \n \n
    \n

    Infuse\/Withdraw Syringe Pump<\/p>\n

    Minimum Flow Rate: 1.26pL\/min (0.5 uL syringe)<\/p>\n

    Maximum Flow Rate: 88.28mL\/min (60mL syringe)<\/p>\n

    100-240V AC, 50\/60Hz<\/p>\n

    also available as dual rate pump system<\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n

    \n \n \n
    \n \n
    \n \n
    \n \n
    \n
    \n \n \n
    \n \n
    \n \n
    \n
    \n \n \n \"\"\n
    <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
    \n
    \n \n \n
    \n \n
    \n \n
    \n \n \n

    Julabo usr 3 water baths<\/h4>\n <\/div>\n <\/div>\n
    \n \n \n
    \n

    PURA water baths stand for a straightforward and safe working in the laboratory. The high-quality water baths offer a temperature stability of \u00b1 0.15 \u00b0C 2). The working temperature range of +18 \u00b0C to 99.9 \u00b0C 1) allows a wide range\n of applications, such as routine laboratory work, temperature applications for samples, incubation, material testing, corrosion testing, temperature control applications of cultures as well as temperature tests of food and beverages\n and in the dental field. <\/p>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

    OUR INTEGRATED OPTICAL LAB Our Integrated Optical Lab combines advanced techniques\u2014such as localized […]<\/p>\n","protected":false},"author":2,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"page-templates\/full-width-page.php","meta":{"_themeisle_gutenberg_block_has_review":false,"footnotes":""},"class_list":["post-278","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/nanosmartlab.cnr.it\/index.php?rest_route=\/wp\/v2\/pages\/278","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nanosmartlab.cnr.it\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/nanosmartlab.cnr.it\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/nanosmartlab.cnr.it\/index.php?rest_route=\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/nanosmartlab.cnr.it\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=278"}],"version-history":[{"count":20,"href":"https:\/\/nanosmartlab.cnr.it\/index.php?rest_route=\/wp\/v2\/pages\/278\/revisions"}],"predecessor-version":[{"id":2275,"href":"https:\/\/nanosmartlab.cnr.it\/index.php?rest_route=\/wp\/v2\/pages\/278\/revisions\/2275"}],"wp:attachment":[{"href":"https:\/\/nanosmartlab.cnr.it\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=278"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}